If you’ve ever stood inside an outdoor steam sauna room on a crisp morning, sweat beading on your skin while soft morning light filters through a wall, you know the difference a simple window makes. I’ve spent 7 years building and customizing these spaces as an outdoor steam sauna room supplier, and one of the most common questions I get from new customers is: “Can I add a window to my outdoor sauna? And how do I do it right?”
The answer is yes, but it’s not just cutting a hole in the wall and slapping in a piece of glass. A sauna’s core function relies on consistent, regulated heat, sealed air, and resistance to extreme outdoor weather—so a poorly installed window can ruin all that. Over the years, I’ve helped dozens of homeowners and small businesses add windows to their saunas, and I’ve seen what works (and what leads to mold, heat loss, or even broken glass after a single season). Today, I’m breaking down the process step by step, plus sharing tips to make your window addition both functional and enjoyable.
First: Ask the “Why?” Before You Plan
Before you grab a drill, pause to define what you want your sauna window to do. This shapes every choice you’ll make. Most customers fall into two groups:
- Light and view seekers: They want to watch the sunset while they sweat, or let in natural light instead of relying solely on sauna lights. If this is you, you’re probably adding a window to a side wall (not the front, where door access is) of a smaller outdoor sauna, like the compact models we offer at Small Outdoor Sauna.
- Ventilation prioritizers: They hate that traditional steam saunas can feel stuffy, so they want a window that lets in fresh air without dumping all the heat. For these folks, a small, operable window near the ceiling or far from the heater makes sense.
I once had a customer who tried to add a huge picture window to his outdoor steam sauna room because he wanted to show off his backyard pond—turns out, he didn’t account for the fact that glass transfers heat, so his sauna took 20 minutes longer to reach 180°F each time he used it. That’s a classic misstep, so taking 10 minutes to map your goal will save you hours (and money) later.
Step 1: Pick the Right Window Type (Not Just Any Glass Will Work)
This is the most critical decision, because not all windows are built for sauna environments. Saunas get extremely hot (150–195°F), have high humidity (70–90%), and sit outside year-round, so regular windows—even double-pane kitchen ones—won’t hold up. Here’s what I recommend:
- Tempered glass, always: Even if you’re only adding a small window, skip acrylic or regular glass. Tempered glass shatters into small, round pieces if it breaks, rather than sharp shards, and it can withstand sauna temperatures without warping. We use ¼-inch tempered safety glass for all our sauna windows, and we only source it from suppliers certified for extreme heat.
- Operable vs. fixed windows: If ventilation is your goal, go with a small, awning-style window that hinges at the top—you can crack it open a few inches to let fresh air in, but it stays sealed when closed to keep heat in. If you just want light, a fixed pane is cheaper and easier to install, with no risk of air leaks.
- Frame material: Never use wood frames (they’ll warp from heat and humidity) or aluminum (it conducts too much heat, leading to condensation and heat loss). The only acceptable options are marine-grade vinyl or fiberglass—they’re moisture-resistant, don’t expand or contract with temperature swings, and won’t crack over time. For example, all the windows we install on our Outdoor Steam Sauna Room stock come with vinyl frames, because they’re proven to hold up in rain, snow, and 200°F heat.
Pro tip: Avoid very large windows (over 12x18 inches, for most saunas). We see a lot of backyard infrared sauna owners, who often want bigger openings, but even for our Backyard Infrared Sauna, we advise maxing out at a 16x20 inch window—any larger, and you’re sacrificing too much heat retention.


Step 2: Prep the Sauna Wall (Don’t Cut Before You Measure)
Once you’ve picked your window, it’s time to prep the wall. This part is where mistakes happen—if you cut the wrong size or don’t reinforce the wall, you’ll end up with gaps that let heat escape or, worse, water leak into the insulation (which leads to mold, a sauna’s worst enemy). Here’s my step-by-step prep:
- Locate the right spot, not too close to the heater: The sauna heater (usually a wood-burning or electric model) generates a lot of direct heat, and putting a window within 12 inches of it can cause the glass to overheat. I recommend placing windows 2–3 feet away from the heater, and at least 18 inches above the floor—high enough that steam won’t pool directly on the glass (which causes fogging) but low enough to enjoy the view.
- Mark the opening perfectly: Measure your window frame, then add ½ inch to both the width and height—this gives you room for insulation and caulk. Use a level to draw straight lines, and double-check twice: if your opening is lopsided, the window won’t seal properly.
- Reinforce the wall inside and out: Most outdoor sauna walls are made of cedar, redwood, or spruce (if you opt for our Redwood Outdoor Sauna, the wood is naturally rot-resistant, which makes this step a little easier). Inside the sauna, add a 2x4 block between the wall studs where you’ll cut the opening—this keeps the wall from bowing when you install the window. Outside, add a metal or vinyl flashing trim along the top of the opening (shaped like an L) to direct rainwater away from the wall, not into the gaps.
Pro mistake to avoid: Cutting the opening before you have the window on hand. I once had a customer who ordered a window online, cut the wall, and then realized the frame was 1 inch wider than he thought—he had to patch the wall and start over, which added $300 to his project. Always have the window in your hands before you start cutting.
Step 3: Install the Window (Seal It Tight—We Mean Tight)
Now for the install. If you’re handy with basic tools, this is a DIY project (I’ve helped a handful of customers do it, and they saved a lot of money), but if you’re not comfortable with caulk and level work, hire a local contractor who’s worked on saunas—bad sealing is not worth the risk. Here’s how to do it right:
- Insulate first: Before placing the window, fill the gap between the wall stud and the window frame with closed-cell foam insulation, not fiberglass. Closed-cell foam is moisture-resistant, doesn’t hold heat, and won’t compress over time—fiberglass will absorb steam and eventually grow mold.
- Fit the window and level it: Set the window frame into the opening, and use shims (small wooden or plastic wedges) to make sure it’s perfectly level and plumb. You don’t want a window that tilts inward or outward, because that will cause leaks. Once it’s level, secure the frame to the wall studs with stainless steel screws (regular steel will rust over time, leaving stains on your sauna wall).
- Seal inside and out—two layers: This is non-negotiable. On the inside (your sauna wall), apply a high-temperature, silicone-based caulk (regular caulk will melt at 180°F) around the entire edge of the window frame. Smooth it with a wet finger to get a uniform seal. On the outside, use exterior-grade, all-weather caulk to seal the same edge, and add a bead of caulk along the top of the flashing trim to block any water that could seep under the frame.
I test every window I install by pouring a cup of water on the outside sill—if any seeps in, I go back and add more caulk. Even a tiny gap can lead to big problems after a few heavy rainstorms.
Step 4: Finish the Look (Make It Match Your Sauna)
Once the window is installed, it’s time to make it look like it was always part of your outdoor steam sauna room. Most customers use the same wood or vinyl as their sauna’s wall trim—for example, if your sauna is cedar, add cedar trim around the inside of the window to match. If you want a more modern look, keep the trim minimal, just a thin vinyl strip to cover the screw holes.
For infrared sauna owners, keep in mind that Outdoor Far Infrared Sauna models run at lower temperatures (120–140°F), so you have a little more flexibility with window size, but the same sealing rules apply. No matter what type of sauna you have, a polished window finish makes the space feel intentional, not like an afterthought.
Common Mistakes to Avoid (I’ve Seen All of Them)
After helping hundreds of customers, I’ve compiled a list of the mistakes that almost always come back to haunt people:
- Using regular glass: I can’t tell you how many customers called me last summer saying their sauna window cracked after a week—turns out, they used a $20 piece of glass from the hardware store, not tempered glass. Tempered glass costs $10–15 more per square foot, but it’s worth every penny.
- Skimping on sealing: One customer skipped the interior silicone caulk because it “looked messy,” and within a month, mold was growing behind the window frame. A good seal is invisible, but it’s non-negotiable for a sauna’s air quality.
- Putting the window too close to the door: If your window is right next to the sauna door, when you open the door, cold outdoor air rushes in and cools the space. I keep a 1-foot gap between doors and windows, so air circulates without dropping the temperature.
Final Thought: This Is Your Space—Make It Yours
At the end of the day, adding a window to your outdoor steam sauna room is all about personal preference. Whether you want to wake up to sunlight while you sweat, or crack a small window to let in crisp air on cool evenings, a well-installed window will elevate your sauna experience from a functional space to a little backyard retreat.
If you’re ready to add a window to your existing sauna, or you want to build a new one and include a window from the start, we have the right products and expertise to help. Our team has years of experience customizing outdoor sauna spaces, and we can guide you through every step, from picking the right window to installation tips. Reach out to our team for a consultation to get started on your perfect sauna space.
References
- International Residential Code (IRC) for Sauna Safety and Construction (2021)
- Sauna Industry Association (SIA) Guide to Outdoor Sauna Insulation and Weatherproofing
- ASTM E84 Standard Test Method for Surface Burning Characteristics of Building Materials (for tempered glass in high-heat environments)
- Marine Grade Vinyl Specifications for Exterior Building Materials (American Boat & Yacht Council, 2020)
